The flow-passing parts of stainless steel submersible sediment pumps, stainless steel sand discharge pumps and stainless steel slurry pumps are made of fully cast stainless steel (all can be customized). They have good corrosion resistance, large flow channels, and are suitable for corrosive applications. Working conditions of slurry, sand, gravel, slurry, slurry, dredging and slag discharge, etc.
Conditions for use of stainless steel sediment pump
． The power supply is (needs to be customized)/three-phase AC power supply, and the capacity of the distribution transformer is times the rated capacity of the motor.
． value, the medium temperature shall not exceed ℃, the medium temperature shall not exceed ℃ (the maximum temperature shall not exceed ℃), and it does not contain flammable and explosive gases.
． The maximum weight concentration of solid particles in the medium.
． The diving depth of the unit is not greater than 1 meter, and the minimum diving depth is subject to submerging the motor.
． The working position of the unit in the medium is vertical, with the upper part suspended.
Product Features
The whole machine is a dry motor-under-pump structure. The motor is protected by a mechanical seal, which can effectively prevent high-pressure water and impurities from entering the motor cavity.
.In addition to the main impeller, there is also a stirring impeller, which can stir the sludge settled at the bottom of the water into a turbulent flow and then extract it.
.The main flow-passing parts such as impeller and stirring impeller are cast with high chromium alloy, which is wear-resistant, corrosion-resistant, non-clogging, has strong sewage discharge capacity, and can effectively pass through larger solid particles.
.It is not limited by the suction range, has high slag suction efficiency and more thorough desilting.
.No need to equip auxiliary vacuum pump, lower investment.
.No need to equip with auxiliary stirring or spraying device, making the operation easier.
.The motor is submerged underwater, eliminating the need to build complex ground protection and fixing devices, making management easier.
.The stirring impeller directly contacts the deposition surface and controls the concentration through the depth of penetration, so the concentration can be controlled more freely.
.The equipment works directly underwater without noise or vibration, making the site cleaner.
Main applications of stainless steel sediment pumps
. Sand settling slurry in sedimentation tanks such as steel plants, power plants, iron ore plants, etc. that are highly corrosive in industrial and mining enterprises. Clear.
.Sediments from sewage treatment plants in the environmental protection industry, etc.
.In the food industry, it is used to transport wine, waste residue and ingredients in the wine making process in wineries.
.In the textile industry, it is used to transport synthetic fiber liquid, viscose liquid, dye, ink, and nylon powder liquid.
.Used in papermaking industry for transporting pulp black liquor.
.Ground pumps used in the petroleum industry to transport various oil and grease products.
.Chemical industry is used to transport various suspensions, latex liquids, acids, alkali and salt industries.
.In the shipbuilding industry, it is used to transport residual oil, cabin cleaning, sewage, sea water, etc.
.Conveying mortar and plaster in the construction industry.
.Metallurgical mines are used to transport oxides, waste water, and mine drainage.
.Large-scale salt mines are used to transport corrosive salt particles, brine and salt mud.
Quality and after-sales
1. Quality and technical standards are manufactured in accordance with national standards/standards, and the quality assurance system is implemented in accordance with them.
2. Technical standards, conditions and deadlines for suppliers to be responsible for quality, and three quality guarantees.
3. During the warranty period, if the conveyed medium meets the requirements of the pump's flow-passing parts and can comply with the instructions for use, if the product is damaged or fails to work properly due to poor manufacturing, our factory will replace or repair the wearing parts free of charge. Not within this period.
4. The wearing parts are made of high wear-resistant alloy steel
5. Our factory ensures that we can provide customers with accessories at low prices for a long time.
6. For cooperative units, our factory provides complete after-sales service to customers.
7. You can return the goods if you are not satisfied
Hourly hotline (WeChat)
Product pictures
Stainless steel submersible sediment pump